Double Deck Car Carrier

Short Description:

The car carrier can be made into different sizes according to customer needs, our production line will make the double deck loading with hydraulic system to carry with 6-8 unit or more for the skeleton car carrier . 

The frame is welded I-beam, and the entire body is fully automatic submerged arc welding and carbon dioxide gas shielded welding. After the welding is completed, shot peening is carried out to eliminate welding stress and improve the adhesion of the paint surface, so that the quality is stable and the appearance is more beautiful. 

The upper chassis can be divided into two or three pieces, and the height can be adjusted by hand chain hoists and hydraulic cylinders. 

  • Origin: China
  • Trading Mark: ORVC / Oriental Vehicles
  • Payload : 40 Ton
  • Axles: 2-3 axles / Customized
  • Loading with Cars: 6-8 units / Customized
  • Size: 13*2.55*3.65 meter
  • Product Detail

    Product Tags

    6 unit car carrier drawing
    Toyota  Ford car carrier (3)
    Toyota  Ford car carrier (4)
    Toyota  Ford car carrier (7)
    Toyota  Ford car carrier (1)
    Toyota  Ford car carrier (2)

    DIMENSION

    Overall Length: 17,990mm

    Overall Width: 2,490mm

    King Pin Setting: 900 mm

    Wheel Span: 12,010 mm

    Axle Spacing: 1,300 mm

    RUNNING GEAR

    Suspension: Under mount double‐axle suspension with equalizer; 6‐leaf spring

    Axle: Two axles with 10,000 kg capacity per axle. Brand: York

    Brake: Dual lines pneumatic brake system, no ABS.

    Parking Brake: Type 30/30 spring brake system on all axles.

    Wheel: 6.5‐15,10 holes wheel.8Pcs made in China.

    Tire: 8.25R15 8Pcs Michelin

    King Pin : 3.5”, Baohua, welding type

    LANDING LEG:Two speed manual operation type with sand shoes

    ELECTRICAL:

    Voltage: 24 Volt.

    Receptacle: 7 way

    Light: Front marker lamp: white ; Side marker lamp: amber

    Rear lamp: red; Turn signal lamp: amber

    STRUCTURAL WEIGHT RATTING:

    Tare Weight: 9,600kg

    Payload: 12,000kg

    G.V.W.R.: 21,600kg

    King Pin Weight: 7,100kg

    Axle Weight: 14,500kg

    SPECIAL FEATURES:

    Construction: Two “I” beam made of high yield strength steel, connected by cross

    member beams. All welded steel construction.

    Hydraulic system: Liftable decks actuated by hydraulic cylinders (overall 8 pcs). Prime

    Mover hydraulic modification will be done by THT, but PTO should be provided by

    the customer.

    Painting: Painting color according to customer’s requirement

    Accessories: 32pcs tire stoppers, 32 pcs tire tighteners; Hydraulic Components on

    tractor including pump 1Pcs, 40L oil tank 1Pcs; hydraulic hoses & connectors and

    quick coupler 1/2” 2Pcs (will be delivered in loose)

    Note:all the details not mentioned above should comply with Chinese regulations 。

    Toyota  Ford car carrier (7)

    The closed front piece can be covered with punched small corrugated sheet, the side is covered with small corrugated sheet or punched corrugated sheet, and the top is equipped with awnings and rods. ( Optional according to the clients )

    The whole vehicle is attached with a tool box, a spare tire rack, and a drip brake system to improve the safety of vehicle transportation.

    Our Car Carrier Advantage :

    Innovative design:

    Modular design, through CAE strength analysis of the whole vehicle, the main key components are made of high-strength steel to improve strength and reduce self-weight. The overall truss structure is stable, reliable and high in strength.

    Premium craftsmanship:

    The laser cutting precision is high; the mirror surface has no burrs, no grinding, no defects in the gap, and no stress concentration points; the laser cutting hot-melt area is small, the material does not change, and the rigidity is not lost.

    Automated Robotic Welding:

    High continuity, high quality and beautiful appearance; can work endlessly, not limited by "sleep" time; high efficiency, low labor intensity; less pollution, reduce intermediate turnover deformation.

    Electrophoresis KTL:

    Car electrophoresis process, paint life of 8-10 years, no paint peeling; no dead ends in electrophoresis; environmental protection and no pollution.

    Assembly accessories:

    Easy to disassemble, save time, high attendance rate; strong interchangeability, high disassembly and assembly efficiency; easy to damage and repair, direct replacement without fire; beautiful appearance and long-lasting.

    Short delivery time:

    Modular design, prefabricated in advance for module production; fully automated production line to shorten production tact; short delivery cycle and high efficiency.

    Cost-effective:

    The performance of the whole vehicle is enhanced, the service life of the whole vehicle is prolonged; the maintenance is less, and the vehicle attendance rate is high; the secondary sales cost is saved, and the secondary efficiency success rate is improved;

    BV inspection & Product pictures  (16)

    Clients may get confused when they choose the trucks from China , especially when all the trucks look all the same to them , or when it is their first time to purchase the truck from internet . 

    Our factory can help you select the correct model since we are the manufacturer producing the upper body or the semitrailers for the complete set of the truck . We have better knowledge to understand fully about the specs of the trucks and the vehicles . For more information details , please contact us via email or whatsapp .

    Production Time : 35 Days

    Custom clearance : 2 Days

    Others:

    - 3 Pairs of brake shoes will be given free

    - 1 spare-tire

    - Operation Tool Kit

    - Fire extinguisher

    Above parts are given freely to clients when order is placed to us .

    Others:

    The new trailers will be waxed twice before shipment , to protect them from outside corrosion .


  • Previous:
  • Next:

  • Write your message here and send it to us

    Send your message to us:

    Write your message here and send it to us